Page 1 of 1
Anti-Laggin Commands
Posted: Wed Apr 07, 2004 9:36 am
by LaggizZ
Hello ... Give me some cfg commands wich do the aq2 flooth more , i have nc and i play with NCopenGL .. and plz write what it do to
srry if my english is bad im just a "14 year old swede "
Posted: Wed Apr 07, 2004 10:06 am
by Winball
cl_maxfps "140"
rate 12000
Posted: Wed Apr 07, 2004 10:12 am
by LaggizZ
Humm .. and one thing more , >->
(CPU) 1-Intel P2 Celeron, 300MHz, 128KB (0% Load) .:. (RAM) usage:
169/192MB (88.02%) .:. (GFX) SiS 6326, (Display) 1024x768/16bit
(OS) Windows 98 (4.10 - 2222), (installed for) 34w 3d 5h 48m, (uptime) 8h 24m 12s .:. (HDDs) 2.25GB/6.02GB(37.3%) free
And a good old voodoo2
Posted: Wed Apr 07, 2004 10:33 am
by dudemcpek
rate 10000
cl_maxfps 90
I think this is better for voodoo2
Posted: Wed Apr 07, 2004 6:45 pm
by Deathie
There was this site somewhere
where were tips to tweak your connection at quake2..
But anyways..
Basicly it was like this:
Join some server and put your netgraph on...
Then put some values of rate and cl_maxfps
and then decrease and increase them so that
ur netgraph is totally (or atleast almost) flat.
That might not be 100% correct but i think it might give u some direction..
If i dont remember totally wrong
When i had Pentium 2 350mhz, 128mb RAM (or 64
) and voodoo2
I used rate 6000 and i quess cl_maxfps was 85
Posted: Thu Apr 08, 2004 4:39 am
by nine
---[ boodbyelag.cfg ]---
set sw_mode 0
set sw_mipcap 3
set sw_waterwarp 0
set sw_mipscale 100
set s_khz 11
set s_loadas8bit 1
vid_restart
bind F11 "exec goodbyelag.cfg"
Posted: Sat Apr 10, 2004 7:36 pm
by Gen
c:/windows/system.ini
search [386Enh]
and put this ConservativeSwapfileUsage=1
downn of [386Enh]
not erase anything.
Posted: Sun Apr 11, 2004 4:17 am
by birdie
Gen wrote:c:/windows/system.ini
search [386Enh]
and put this ConservativeSwapfileUsage=1
downn of [386Enh]
not erase anything.
What that exactly does?
Posted: Sat May 08, 2004 4:18 am
by Hawk
well correct me if I'm wrong, but isn't rate the amount of bytes sent to the server or something? which means 6000 is a modem rate(in the upper limits
) wouldn't it be better with a higher rate even if your computer is pretty old?
also, how many fps do you have when you type "timerefresh" ?
Posted: Sat May 08, 2004 4:24 am
by Da^JuaN
nocheat 2.40 has a new feature: cl_maxpackets, imported from q3.
Posted: Sat May 08, 2004 5:59 pm
by Endy
Norse wrote:---[ boodbyelag.cfg ]---
set sw_mode 0
set sw_mipcap 3
set sw_waterwarp 0
set sw_mipscale 100
set s_khz 11
set s_loadas8bit 1
vid_restart
bind F11 "exec goodbyelag.cfg"
Those are all commands when playing with software
perhaps he doesn't want that...
aren't there like 1000 mipscale etc. etc. commands with GL as well, I've seen pics of ppl's quake which looks kind of like QW with lots of picmips and mipcaps etc... don't remember the commands...
56k
Posted: Wed May 19, 2004 12:06 am
by Goofy -BzD-
modem connect 33600
cl_maxfps 30
rate 3500
Posted: Thu May 20, 2004 12:27 pm
by Clown
Down down the texture quality!
I lost my config that I had when I was on a P2 300/modem. Sorry.